DIY Tomato Cage Christmas Tree


DIY Tomato Cage Christmas Tree for your front porch - from the Cup of Tea blog

Ta da! A seasonal DIY!

This doesn’t happen very often, folks.

I was flipping through a magazine (don’t remember which one!) and stumbled across a really neat idea for transforming a boring wire tomato cage into a cute tree to hang your Christmas cards from. It was embelished with pom pom trim, ribbon, and fairy lights.

Ye ol’ wheels started turning, and I thought why not wire on some greenery from the yard and make a tree to “plant” in my front door urn! Genius!

Turns out, after a quick Pinterest search, I wasn’t so genius.

It’s been done.

But still, I attempted it, and you know what? It wasn’t that bad! It was easy, in fact!

Let me show you how it’s done.

First, you’ll need to gather greenery. Lots of it! And a variety of stuff. But just wander around your yard (or your neighbor’s) and snip away! I grabbed basic pine, boxwood, holly (some with and without berries), and a few other green bushes that I can’t identify.

It helps if you have a great helper!

Collecting greenery for our DIY Christmas Tree

Stick it in some buckets as you go. Β And gather the rest of your supplies.

You’ll need:

What You'll Need for your own DIY Christmas Tree

Buckets of greenery, but especially pine branches of varying thickness and width. Snip some that are long and a single branch, and then others that have several smaller branches on one main branch. Pine will provide a base for all your other greenery to lay on. I needed about 25-30 pine branches of varying sizes.

Wire cutters

Garden Pruning Shears

Wire Tomato Cage, 42″ diameter

Floral Wire

Christmas/Fairy lights (if needed)

Any other embellishments, like ribbon

A container to put it in, whether it’s an urn, a basket, or even a terracotta dish!

The only thing I bought for this project was the tomato cage (cages, actually. I made one for the front porch and one for the back deck). I found floral wire in my craft bin, as well as those mini wire cutters. But the heavier duty wire cutters were found in my husband’s tool box.

To get started, I cut the bottom, largest ring off the tomato cage, so it wouldn’t be too tall. I was concerned about wind knocking it over. You don’t have to do this if the height works for your space.

Step One: Cut the lowest level off the tomato cage for your DIY Christmas Tree

One tomato cage was thicker than the other. I worked at cutting that thicker wire cage for about 20 minutes.

Next up, bend the three legs of the tomato cage (which will be our top!) and wire the legs together with your floral wire. You’ll now have a tree/cone shape, ready for greenerizing!

Join the legs of the tomato cage together to form the cone for your DIY Christmas Tree

And then, “plant” your tomato cage in whatever container you’ll be using for display. I used a footed urn for one and a terracotta dish for the other. This way you can see how it looks in that finished location, as you go.

Next up, begin layering your large pine sections by laying a branch on one of the three legs, with the cut branch at the top of the cone. Wrap wire around the branch to hold it in place. Then keep wrapping wire around the rest of the pine branch (loosely!). As you wrap, add another pine branch, tucking the cut branch part under the above branch. And keep wrapping! Basically, do one continuous wrap until you have enough pine branches to touch the bottom of your cage.

Honestly, this was the hardest part, and my second one had better technique that the first. I found that attacking each leg separately, with that continuous wrapping, was the best method.

Wrap floral wire around your pine branches to create a base for your DIY Christmas Tree

If you’ve ever made your own pine wreath before, it’s like that! Except vertical.

Continue on with the other two legs!

Finished wrapping for my DIY Christmas Tree

You’ll see some gaps between the pine “legs” now, so wire on some more pine to the hoop parts to cover those sections in.

And finally, just start jabbing in to the pine and twisted wire your other greenery snips. You can go for a uniformed look, or a more natural “wild” look.

And for the top, you might want to consider some branches, with or without leaves. Or wire on a Christmas ornament!

You can also finish off your DIY tree with some lights. Don’t forget to tuck in extra greenery around the base to close any gaps between your tree and the container.

Here it is!


A DIY Christmas Tree using a wire tomato cage

A DIY Christmas Tree using a wire tomato cage

A DIY Christmas Tree using a wire tomato cage

I was on such a roll that I did that second tree really fast! This one sits on our back deck.

A DIY Christmas Tree using a wire tomato cage

I had some greenery left over, so I thought, since I was in crafting mode, I should make a door swag for our deck door!

A simple door swag with pine for Christmas

I’ve never been so handy with pine before! I took one wreath making class, many years ago, and that was my one and only time making something like this. Don’t know what got into me this year!

This project looks complicated, but it’s actually really simple! Collecting the greenery and then getting that first layer of pine is the hardest part, but truely isn’t that hard.

While searching for others that were also geniuses with their tomato cages (even though I was sure I was the only one!), I came across a video from P. Allen Smith, explaining the process with his delightful Arkansas accent! There’s also a blog post with written instructions, if mine weren’t sufficient. I’m sure they were not!

Are you doing any DIYs this year for Christmas? Maybe gifts? Any fun decor ideas? Let me know!!

Don’t forget to follow me: Instagram | YouTube | Twitter |Β Facebook | Google+ | BlogLovin’Β | Pinterest

22 comments

  1. Sandy says:

    Katie this is such a brilliant idea! It looks so cute :))) and your baby girl is so beautiful! If I don’t hear from you have a lovely Christmas and God bless!

  2. Whitney Jordan says:

    I am impressed!! I love how it turned out and love the way the different types of greenery came together. I was wanting a tree for my front porch, but didn’t want to spend big bucks on one. This might just be the perfect solution to my Christmas tree problem. Thanks for the tutorial!!

  3. coffeewithcaitlin says:

    Love this idea! I wanted to do it with lit garland (Since everything we have is basically dead here lol) but I doubt we get to it. May be a Christmas in July type of project for next year though πŸ™‚ Yours turned out great!

    • Katie @ Cup of Tea Blog says:

      Lit garland would be really cute! There were so many variations on Pinterest when I looked. This was, of course, when I discovered I wasn’t the first genius to come up with this idea πŸ™‚ The wrapped garland was definitely a pretty look! Love the idea of Christmas in July πŸ™‚

Leave a Reply to Juliette Cancel reply